Factory-direct-hardware Delta 51551 Classic Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Für Zuhause Factory-direct-hardware Delta 51551 Classic herunter. Factory Direct Hardware Delta 51551 Classic User Manual Benutzerhandbuch

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 10
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 0
Hand Shower Units
Do-It-Yourself
Instructions
1
10/24/11
72634 Rev. A
Congratulations. You’ve purchased
what we believe is the world’s finest hand
shower. These are general instructions
that cover several similar models, so
don’t be alarmed if parts are displayed
that are not included in the unit you
purchased.
TOOLS REQUIRED
You will need a pair of pliers, a piece of
cloth, six inches of plumber tape, and a
large towel.
IMPORTANT
n Always protect the finish of parts with
a heavy cloth when using pliers or a
wrench.
n Align threads properly when
assembling components to avoid
damaging or stripping threads.
n Suggestion: Place a towel on the
bottom of the tub beneath the old
shower head. If you accidentally drop
something this can help avoid losing
it down the drain or chipping the finish
of your tub.
REMOVE THE EXISTING
SHOWER HEAD
Your goal is to unscrew the existing
shower head without
unscrewing or
rotating the shower
arm that it is
attached to. Your
existing shower
head will un-screw
COUNTERCLOCKWISE.
Note: If your shower arm has a ball
on the end, it will not work with this
shower unit and will need to be
replaced with a standard shower arm.
We suggest a Delta
®
model RP40593.
After removing the
shower head clean the
threads of the shower
arm with a piece of
cloth or wire brush if
necessary. Then wrap the six inches of
plumber tape around the threads of the
shower arm in a CLOCKWISE manner.
Be careful to stretch the tape into the
grooves of the threads. The tape provides
a lubricant and added sealant for the
threads even when a gasket is used.
NEVER USE PIPE DOPE.
1.
Write purchased model number here.
Models
51551 & 51751
1.
REMOVE
SHOWER HEAD
2.
INSTALL
MOUNT
3.
ATTACH
HOSE
4.
ATTACH
HAND SHOWER
5.
CHECK FOR
LEAKS
72634 Rev A.indd 1 11/15/11 4:47 PM
Seitenansicht 0
1 2 3 4 5 6 7 8 9 10

Inhaltsverzeichnis

Seite 1 - Do-It-Yourself

Hand Shower Units Do-It-YourselfInstructions110/24/1172634 Rev. A Congratulations. You’ve purchased what we believe is the world’s finest hand shower.

Seite 2

y asegúrese de que lo está colocando de manera que permita el ajuste de altura total con la manguera de la regadera que se va a utilizar.2. DECIDA EL

Seite 3

INSTALLING SHOWER MOUNTSShower arm pin mountInsert the thick gasket into the nut on the end of the shower arm mount and screw the nut CLOCKWISE onto t

Seite 4

CONNECT THE HOSE TO WATERThe hose must connect to the source of water: either the outlet of the shower arm, or the outlet of the shower arm mount. If

Seite 5

FINISH AND CHECK FOR LEAKSNote: Any distrtion the hose may have assumed in packaging will relax soon after warm water has run through the hose.Hang y

Seite 6 - Hágalo-Usted-Mismo

adjustment with the shower hose to be used.2. DECIDE ON MOUNTING METHODOn any smooth surface such as tile, fiberglass, marble, etc., the special mounti

Seite 7

110/24/1172634 Rev. A Felicidades. Usted ha adquirido la regadera de teléfono que consideramos es la mejor del mundo. Estas son instrucciones generale

Seite 8

INSTALE EL SOPORTE DE LA REGADERASoporte de PernoInserte el empaque grueso en la tuerca que está en el extremo del soporte y enrosque la tuerca en sen

Seite 9

CONECTE LA MANGUERA AL AGUALa manguera debe conectarse a una salida de agua: ya sea a la salida del brazo, o a la salida del soporte del brazo. Si ti

Seite 10

TERMINANDO Y REVISANDO FUGASNota: Si la manguera presenta deformación por haber estado empacada durante un tiempo, ésta desaparecerá tan pronto haya fl

Kommentare zu diesen Handbüchern

Keine Kommentare