Factory-direct-hardware Hansgrohe 10135 Bedienungsanleitung PDF herunterladen (Seite 3)

• Thread on the escutcheons with o-

rings. Install the red and blue color

rings. Install the white plastic handle

snap connectors with the screws.-

Press the handle firmly over the snap

connector and push firmly

downwards.

• Seat the spout assembly with sealing

ring on top of the mounting surface.

From below, thread on the fiber

washer, metal washer, and mounting

nut.

• Make sure that the spout assembly

stands straight. Tighten the

tensioning screws.

• Use the 9/16" compression fittings to

install the connection hoses to the

valve outlets.

• Connect the valves to the angle stops

with ½” supply hoses and nuts.

(Hansgrohe does not provide angle

stops, supply hoses, or nuts.)

1 2 3 4 5 6 7 8

Keine Kommentare

Factory-direct-hardware Hansgrohe 10135 Bedienungsanleitung Seite 3