Factory-direct-hardware Hansgrohe 11024 Bedienungsanleitung PDF herunterladen (Seite 8)



English

Install the pop-up drain

Remove the plunger.

Unscrew the ange from the tee.

Unscrew the tailpiece from the tee.

Wrap the tailpiece threads with Teon tape. Install

the tailpiece on the tee.

Install the sealing gasket on the ange.

Rest the ange in the sink outlet.

Install the mack gasket, friction ring and retainer nut

on the ange.

Install the tee and tailpiece on the ange.

Tighten the retainer nut.

Place the plunger in the drain.

Install the ball rod so that the end goes through the

loop in the bottom of the plunger.

Install and hand tighten the pivot ball nut.

Connect the swivel connector to the end of the ball

rod.

Connect the swivel connector to the end of the pull

rod.

Test the drain. Reposition the swivel connector if

necessary.

Tighten the swivel connector screws.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Keine Kommentare

Factory-direct-hardware Hansgrohe 11024 Bedienungsanleitung Seite 8