Factory-direct-hardware Hansgrohe 39135 Bedienungsanleitung PDF herunterladen (Seite 4)

Sit the spout on the countertop. Install the

mounting piece mounting collar.

Attach the compression Y to the bottom of the

spout fitting with the enclosed 10 mm compres-

sion fitting. The metal side of the ferrule should

point upwards. Tighten wrench tight.

Screw the connection hoses to the Y.

Attach the hoses to the valves with the enclosed

3/8“ compression fittings. Use two wrenches,

as shown, to prevent the hoses from twisting.

Connect the valves to the stops with 1/2“ supp-

ly lines (not included).

Install the drain.

Turn on the water and check all connections for

leaks.

3/4”

7/16”

1 2 3 4 5 6 7 8

Keine Kommentare

Factory-direct-hardware Hansgrohe 39135 Bedienungsanleitung Seite 4