Factory-direct-hardware Hansgrohe 10406001 Axor Starck X Bedienungsanleitung PDF herunterladen (Seite 5)

Installation with Duravit Starck X Tub

There must be a minimum 1 1/8” air gap between

the tub filler and the top of the tub. If the air gap

is not at least 1 1/8”, order extension 97686000

separately.

• Cut the plaster shield on the rough-in 3/8" above the

finished floor.

• Remove the flush block using an 8 mm allen wrench (not

included) to remove the 4 bolts. Do not discard the

bolts!

• Seal the floor around the plaster shield with a waterproof

bathroom sealant compatible with the floor surface.

1 2 3 4 5 6 7 8 9 10 11 12

Keine Kommentare

Factory-direct-hardware Hansgrohe 10406001 Axor Starck X Bedienungsanleitung Seite 5